SP-1014 Clear Epoxy forms excellent bondig and instant reparation for jewelry, crystals, glass, metallic components and bathroom amenities. It can be fast curing in 5 minutes with high transparency, high strength and good adhesive effects.
Packing details
ITEM NO: SP-101428GRAM×2
PCS/CTN: 144SETS/CTN 0.025CBM/CTN
1120CTNS/1×20’FT CONTAINER
TECHNIICAL IINFORMATIION
Epoxy is recommended for the following substrates:
Metal | Plastic | Other |
Stainless | Steel Epoxy | Glass |
Aluminum | Phenolic | Ceremics |
TYPICAL USES
Water-Clear Epoxy is designed to repair printed circuit boards (it
does not electrically corrode copper), optical fibers, lenses and
other optical equipment, jewelry, art objects and other
applications where a clear bond is desired.
HOW TO USE
Surface must be clean and dry before application. Remove all
chemicals, dirt wax and oil.
FOLD SNIP SQUEEZE MIX/APPLY
Fold the Doubleagle package along the center seal, snip the end,
squeeze out the contents, mix thoroughly and apply.
STORAGE AND HANDLING
Store Doubleagle adhesives at room temperature in a dry
environment. Extreme low temperatures may cause crystallization.
Extreme high temperatures may degrade the
properties. A wide variety of cleaning solutions are available for
cured and uncured epoxies and polyurethanes.
SAFETY
These materials are intended for commercial and industrial use
only, and the practices of good housekeeping, safety and
cleanliness should be followed before, during and after use.
Although the system contains low volatility materials, care should
be taken in handling. Use adequate ventilation in the work area.
These materials may cause dermatitis in susceptible individuals.
Keep off skin and out of eyes. In case of
accidental skin contact, wash thoroughly with soap and water. In
case of eye contact, flush eyes thoroughly with water and consult a
physician immediately. Refer to Material Safety Data Sheet for
additional information.
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!