Splendor SP-1026 contact adhesive is emulsion or solutions
formulated to bond impervious materials. both faces are covered
with adhesive and allowed to dry before being brought into contact.
it is used for bonding plastics. sticking rubber shoe soles, and
self-seal envelopes. Main uses
Heat and creep resistant bond
Bond wood to wood with overlap shear strength of 482 FIRST AID:
Ingestion: If swallowed and if more than 15 minutes from hospital,
induce vomiting, preferably using Ipecac Syrup APF. Keep head below
hips to prevent aspiration into lungs. Contact a doctor or poisons
information centre immediately while keeping victim at rest.
(Australia ph:13 1126)
Eye: Immediately irrigate the eye with plenty of water for at least
fifteen minutes, holding the eyelids open. Seek immediate medical
attention.
Skin: Remove any contaminated clothing and wash affected areas
thoroughly with soap and water. Seek medical advice if swelling,
redness or irritation occurs.
Inhaled: Remove victim to fresh air immediately. If not breathing,
apply artificial respiration at once and seek urgent medical
advice.
First aid Eye wash fountain, safety shower and normal wash room
facilities. EXPOSURE LIMITS:
Toluene: *TWA 100ppm (377 mg/m 3 ) *STEL 150ppm (565 mg/m 3 )
Hexane (n-Hexane): *TWA 50ppm (176 mg/m 3 ) STEL Not available
As listed in the National Occupational Health & Safety
Commission database. STORAGE AND TRANSPORT:
Store in a cool, well-ventilated area, away from ignition sources,
heat, strong oxidising agents, foodstuffs and clothing. Keep
containers closed when not in use. Take precautions against static
electricity discharges.
Classified as a Dangerous Good Class 3 Flammable Liquid according
to the Australian Code for the Transport of Dangerous Goods by Road
and Rail, Pkg Grp II
Shipping name: ADHESIVES containing flammable liquid Packing details
PCS/CTN: 4 PCS
CTN DIMENSION: 0.016CBM | 
